[Tigers] Edelbrock F4B manifolds

[Jerry]

Jim,

The way I checked the clearance was to put a small dab of modeling clay in
the shape of a Hershey kiss only taller on the air cleaner, and then slowly
lower the hood to see when it started to squash the clay. There isn't much
room for sure. I have an f4b with a Holly 600 double pumper, and only 4
holes in the manifold.

Jerry Christopherson

9473187
TAC682

-----Original Message-----
From: tigers-bounces+jcmc2006=suddenlink.net at autox.team.net
[mailto:tigers-bounces+jcmc2006=suddenlink.net at autox.team.net] On Behalf Of
Rollright at aol.com
Sent: Saturday, October 13, 2007 9:47 AM
To: tigers at Autox.Team.Net
Cc: onegonefish at comcast.net
Subject: [Tigers] Edelbrock F4B manifolds

Hello,
 
Many people have ben very helpful in helping me understand what is involved

in going to a LAT 4 bbl set-up
 
But there appear to be a number of F4Bs
 
The aspect I'd like to ask about now is that the carb mounting hole  
configurations seem to fall into two categories:
 
1)  four holes
2) eight holes
 
It would seem that the eight hole version would hold "whatever" carb.
Question: will the four hole mount the 465 or is the four holer one to  a
void. 
 
I have pictures supplied by different people and e-bay of both.....
 
Best,  (and thanks)
 
Jim  Armstrong
MK 1A  382002083
Rollright at aol.com



************************************** See what's new at http://www.aol.com
_______________________________________________
jcmc2006 at suddenlink.net

Tigers at autox.team.net
http://autox.team.net/mailman/listinfo/tigers