[Tigers] Generator/Alternator??? (Smit, Theo)

Jerry JCMC2006 at suddenlink.net
Tue Nov 13 17:02:24 MST 2007


What's the problem with a Ford alternator? I have one on my car, and it fits
very well in the top right side. You can make it a "one wire" if you get the
small regulator that bolts to the back of the alt. It's about 1 1/2 inches
square and about 3/8 inches thick.

The alt. bolts to the top bolt hole (7/16 inch) in the passenger side and
uses the Ford triangular shaped alt. bracket; however, I did have to modify
that bracket somewhat. It was touching the water pump pulley, so I had to
cut and weld one of the "webs;" but this was very simple to do. The
adjusting arm I got off of an early Bronco, and it needed some "recurving;"
but, I'm sure there are many that could be modified to fit.

I've attached a photo.

Anyway, this is what worked for me.

Jerry Christopherson
9473187
Tac682   

-----Original Message-----
From: tigers-bounces+jcmc2006=suddenlink.net at autox.team.net
[mailto:tigers-bounces+jcmc2006=suddenlink.net at autox.team.net] On Behalf Of
drmayf
Sent: Tuesday, November 13, 2007 1:56 PM
To: Arnie Sugar
Cc: tigers at autox.team.net
Subject: Re: [Tigers] Generator/Alternator??? (Smit, Theo)

Arnie, be sure to tell all of us, lol...

mayf
Arnie Sugar wrote:

>Theo,
>
>I found a small 55 amp one wire alternator that fits nicely in front of
>the head.  If you promise not to tell anyone, I'll disclose its off a
>Hyundai (I know, its shameful).  No big CAT bracket required, just a big
>bolt w/ spacers right into the head and a standard slotted belt tension
>bracket.  I can look up the part # tonight.
>
>Arnie
>
>-------------------
>
>Message: 13
>Date: Tue, 13 Nov 2007 07:41:53 -0700
>From: "Smit, Theo" <Theo.Smit at dynastream.com>
>Subject: Re: [Tigers] Generator/Alternator???
>To: "Don Wheeler" <DWheeler at dopplegangers.net>,
>	<tigers at autox.team.net>
>
>..... other stuff to do on my Tiger right now, but I'm looking again to
>find
>an alternator that is short enough to mount in front of the right side
>head (with standard pulley setup) so that I can make the arrangement
>more compact than it is now. ......
>_______________________________________________
>drmayf at mayfco.com
>
>Tigers at autox.team.net
>http://autox.team.net/mailman/listinfo/tigers
_______________________________________________
jcmc2006 at suddenlink.net

Tigers at autox.team.net
http://autox.team.net/mailman/listinfo/tigers

[demime 1.01d removed an attachment of type image/jpeg which had a name of Finals 044.jpg]


More information about the Tigers mailing list