[Tigers] tiger alignment

[Owain Lloyd]

haha,  good luck setting it...

i think i was aiming for about 4 degrees +ve castor, 1/2 -ve camber
and 1/8" toe in but after about 6 hours on an alignment machine i
think i settled for something like +1 castor, -5 camber and a half
turn off-center rack to get the toe.  car feels very different now,
stiff wheel and turns in very easily but at least it tracks straight
until i can get the crossmember straightened to spec before i align
again.

On Nov 13, 2007 11:17 AM, michael king <michael.s.king at gmail.com> wrote:
> does anyone have the camber castor, toe in/out specs for a tiger?
>
> i have the owners manual,
>
> has front wheel camber @: 1/2 positive +/-1/4
> toe in @:1/8' (3mm) from outside of tyre
>
> so castor settings? My car cas 14x6 wheels, dales springs .. should i
> go a little negative camber? is there a castor setting?
>
> --
> Regards
>
> Michael King
> _______________________________________________
> owain.lloyd at gmail.com
>
> Tigers at autox.team.net
> http://autox.team.net/mailman/listinfo/tigers