<div dir="ltr"><div>Ryan- I painted my '66 Mustang coupe this summer Nightmist Blue with a light red pearl and ghost Lemans stripes in Holographic Silver pearl. It took me 12 hours to shoot the paint, partially because I had to wait for the intercolor clear to set up before masking for the stripes. <br></div><div>The biggest thing is to be completely prepared, I placed 3 fans at the bottom of one garage door, furnace filters in the window that is perpendicular to where the doors are, and let the fans suck the fumes out.</div><div>Clear needs to be shot with a slightly larger orifice, keep the gun about a spread hand span from your work, work from the middle to the edges and always work from a wet edge with your gun PEPENDICULAR to the surface -otherwise you get tiger stripes.</div><div>Be Patient. make sure any small parts (like your shift tower) are well supported-I had a fender extension fall to the ground while shooting color and had to wipe it all off -Be sure to have a large supply of appropriate solvent on hand for cleaning guns and wiping things down. I used a Polyurethane and solvated it with Acetone-keep good gloves handy too.<br></div><div>I sanded the primer, then dry wiped, then tack ragged, then solvent wiped to eliminate any contamination from the tack rag.</div><div>Email me if you want more specific input<br></div><div><div><div dir="ltr" class="gmail_signature" data-smartmail="gmail_signature"><div dir="ltr"><div>Mark Haynes<br></div>It only goes one way- Pay It Forward<br></div></div></div></div></div>