<html><head>
</head>
<body>
<div style="font-size: 10pt;"><div dir="auto">Anyone have a 1275 with a stock clutch on the flywheel attached to the engine? I need the distance from the engine back plate to the pressure plate throw out bearing surface. Or some may refer to it as the " stack height"?</div><div dir="auto">I am working on initial measurements to utilise an annular throwout bearing with a rib case transmission. I do not have a stock flywheel to attach to the 1 engine I have sitting ( siezed presently) to get the measurement.</div><div dir="auto">Now the measurement does not need to be extremly accurate ! A fractional inch is perfect!!! </div><div dir="auto">Developments on this project could be verrrry interesting...</div><div dir="auto">Thank you!</div><div dir="auto">Chuck</div><div dir="auto"><br></div><div dir="auto"><br></div><div dir="auto"><br></div><div><div dir="auto" style="font-size:9pt;"><i>Sent from my LG Mobile</i></div></div></div>
</body></html>