<div dir="ltr">I use a BFS to compress the spring and push the hook end into the backing plate.  Been so long, don't recall the orientation.<div><br></div><div>Rick Neville</div></div><br><div class="gmail_quote"><div dir="ltr">On Sat, Sep 22, 2018 at 10:18 AM Lester via Spridgets <<a href="mailto:spridgets@autox.team.net">spridgets@autox.team.net</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Good Morning all,<br>
<br>
so I noticed that a rear tire was low.  A few weeks later I went to fill it with air.  It had come loose from the rim, and mud daubers (wasp here in the South) had built a nest between the tire and rim.  <br>
<br>
Off comes the rim, this reveals a streak of brake fluid down the tire and a puddle on the driveway.  This caused me to remove the shoes but first, I had to remove that damned spring.  When last I installed these, I stumbled on the fact that there is the easy way to install them and a hard way.  The hard way takes 30 minutes and a lot of cursing an prying while the easy way takes seconds.  does anyone remember my easy way?  I sure don’t.  I vaguely recall that if you just push the spring in oriented the correct way it snaps on to the fitting on the backing plate.  But of course I don’t remember what that orientation is although it “looks like” the hook in the spring should be pointed outwards.<br>
<br>
What say you all?<br>
<br>
TIA,Lester<br>
------------------------<br>
<br>
<a href="mailto:spridgets@autox.team.net" target="_blank">spridgets@autox.team.net</a><br>
<br>
Donate: <a href="http://www.team.net/donate.html" rel="noreferrer" target="_blank">http://www.team.net/donate.html</a><br>
Suggested annual donation: $12.75<br>
<br>
Archive: <a href="http://www.team.net/pipermail/spridgets" rel="noreferrer" target="_blank">http://www.team.net/pipermail/spridgets</a><br>
<br>
Unsubscribe/Manage: <a href="http://autox.team.net/mailman/options/spridgets/healeyrik@gmail.com" rel="noreferrer" target="_blank">http://autox.team.net/mailman/options/spridgets/healeyrik@gmail.com</a><br>
</blockquote></div>