<html><head>






</head>
<body style="margin-bottom:45px">
    <div style="font-size: 10pt;"><div dir="auto">My 68 MIDGET was 180 out when I got it.  Ran good so I left it as is.</div><div dir="auto"><br></div><div id="LGEmailSignatureBox" dir="auto"><div dir="auto" font-size:9pt;"=""><i>Sent from my Verizon LG Smartphone</i></div></div></div><div style="font-size: 10pt;"><div id="LGEmailHeader" dir="auto"><div dir="auto"><br></div><div dir="auto">------ Original message------</div><div dir="auto"><b>From: </b>daredelvis--- via Spridgets<spridgets@autox.team.net></spridgets@autox.team.net></div><div dir="auto"><b>Date: </b>Thu, Dec 21, 2017 11:18 AM</div><div dir="auto"><b>To: </b>Jeff;Spridgets;</div><div dir="auto"><b>Cc: </b></div><div dir="auto"><b>Subject:</b>Re: [Spridgets] Distributor confusion!</div><div dir="auto"><br></div></div><pre>You may be right Jeff and I noted that he is 90 degrees out. I think you can get the pinion that engages the camshaft by a gear in the wrong position. I recall that I had to fiddle with that and consult the Bentley manual when putting my 1275 together for my Elf a few months ago. I’d check that (or more likely I’d move the wires because I’m lazy). 
Brian

> On Dec 21, 2017, at 8:05 AM, Jeff via Spridgets <spridgets@autox.team.net> wrote:

> Brian, I think you are mistaken.  There is only one possible position for the dist. shaft to engage the drive slot.  The slot and distb. shaft tangs are not on center.  They are offset and will only engage in one position.  At least that is how it is on my car for the past 40 yrs..  Jeff Kelly

>> On 12/21/2017 9:18 AM, daredelvis--- via Spridgets wrote:
>> Loosen the distributor. Pull it out an inch. Turn shaft around 180°. There are two possible positions and you have it in the wrong one.
>> Brian
>> 
>>> On Dec 21, 2017, at 1:12 AM, Andy Webster via Spridgets <spridgets@autox.team.net> wrote:
>>> 
>>> Greetings everyone,
>>> I'm currently about to start a freshly rebuilt
>>> 1293.
>>> Got the dizzy drive spindle in, with large side uppermost amd the split pointing to ~2 - 7 o'clock as per the factory manual.
>>> My 25d distributor cap has the wires still from before the rebuild, which I even labelled 1,3,4,2 ( unusually organised for me!).
>>> Problem is, I have the engine at TDC with #4's valves just in their overlap period..i.e. Firing #1 cylinder.
>>> However my rotor is pointing to #3!
>>> To get it near #1 , I'd have to turn the distributor round so the vacuum diaphragm would be at the bottom , its connector pointing to the firewall!
>>> I went to great trouble to time the cam... degree wheel, dial indicator etc, and I'm confident it's within 1•.
>>> I'm also sure I did it right last time around.
>>> 
>>> Can anyone confirm for me please, with the engine at TDC for firing #1, should the rotor point to roughly 1-2 o'clock.
>>> 
>>> On your 25d cap, are the wires for #1 & #3 either side of the arch shaped recess for the low tension wire?
>>> 
>>> It seems I am about 90• out on the distributor leads..  which suggests that I must have got the spindle wrong last time and shifted the leads to compensate... I find that very difficult
>>> to believe..but I suppose it's possible.
>>> 
>>> Maybe someone smarter or than I can deduce my mistakes or confirm my stupidity, but some suggested fixes would be appreciated.
>>> 
>>> Thanks all, and best wishes for a safe and happy Christmas to everybody.
>>> It's 32•C here (90•F) ... good Sprite weather!
>>> 
>>> 
>>> Andy Webster
>>> ------------------------
>>> 
>>><a href="mailto: spridgets@autox.team.net"> spridgets@autox.team.net</a>
>>> 
>>> Donate: <a href="http://www.team.net/donate.html">http://www.team.net/donate.html</a>
>>> Suggested annual donation: $12.75
>>> 
>>> Archive: <a href="http://www.team.net/archive">http://www.team.net/archive</a>
>>> Forums: <a href="http://www.team.net/forums">http://www.team.net/forums</a>
>>> Unsubscribe/Manage: http<a href="mailto:://autox.team.net/mailman/options/spridgets/daredelvis@gmail.com">://autox.team.net/mailman/options/spridgets/daredelvis@gmail.com</a>
>> ------------------------
>> 
>><a href="mailto: spridgets@autox.team.net"> spridgets@autox.team.net</a>
>> 
>> Donate: <a href="http://www.team.net/donate.html">http://www.team.net/donate.html</a>
>> Suggested annual donation: $12.75
>> 
>> Archive: <a href="http://www.team.net/archive">http://www.team.net/archive</a>
>> Forums: <a href="http://www.team.net/forums">http://www.team.net/forums</a>
>> Unsubscribe/Manage: http<a href="mailto:://autox.team.net/mailman/options/spridgets/jeffsbugeye@gmail.com">://autox.team.net/mailman/options/spridgets/jeffsbugeye@gmail.com</a>

> ------------------------

><a href="mailto: spridgets@autox.team.net"> spridgets@autox.team.net</a>

> Donate: <a href="http://www.team.net/donate.html">http://www.team.net/donate.html</a>
> Suggested annual donation: $12.75

> Archive: <a href="http://www.team.net/archive">http://www.team.net/archive</a>
> Forums: <a href="http://www.team.net/forums">http://www.team.net/forums</a>
> Unsubscribe/Manage: http<a href="mailto:://autox.team.net/mailman/options/spridgets/daredelvis@gmail.com">://autox.team.net/mailman/options/spridgets/daredelvis@gmail.com</a>
------------------------
<a href="mailto: spridgets@autox.team.net">
spridgets@autox.team.net</a>

Donate: <a href="http://www.team.net/donate.html">http://www.team.net/donate.html</a>
Suggested annual donation: $12.75

Archive: <a href="http://www.team.net/archive">http://www.team.net/archive</a>
Forums: <a href="http://www.team.net/forums">http://www.team.net/forums</a>
Unsubscribe/Manage: http<a href="mailto:://autox.team.net/mailman/options/spridgets/bmwwxman@gmail.com">://autox.team.net/mailman/options/spridgets/bmwwxman@gmail.com</a>
</spridgets@autox.team.net></spridgets@autox.team.net></pre></div>


</body></html>