<html><body><div style="font-family: Arial; font-size: 12pt; color: #000000"><div aria-label="Compose body">Thank you for all your tips! It turns out that when I switched pistons and i matched the length of the new with the old the new brake piston was to long and not releasing the pressure when i took my foot off of the pedal. It took 3! rotations off to get the pressure to drop so that I have half decent brakes . I need to bleed them and then see if i need to move it in or out to make it perfect.</div><div aria-label="Compose body"><br></div><div aria-label="Compose body">Thanks again for all your help and advice</div><div aria-label="Compose body">Ryan</div><div><br></div><hr id="zwchr"><div style="color:#000;font-weight:normal;font-style:normal;text-decoration:none;font-family:Helvetica,Arial,sans-serif;font-size:12pt;" data-mce-style="color: #000; font-weight: normal; font-style: normal; text-decoration: none; font-family: Helvetica,Arial,sans-serif; font-size: 12pt;"><b>From: </b>"Ryan via Spridgets" <spridgets@autox.team.net><br><b>To: </b>"spridgets" <spridgets@autox.team.net><br><b>Sent: </b>Saturday, December 12, 2015 2:23:39 PM<br><b>Subject: </b>[Spridgets] Bugeye Master cylinder reinstall issues<br><div><br></div>So bench bled rebuilt master. Installed in car. I have clutch with minor bleeding (me and the slave). But my brakes are frozen on. There is NO play in the pedal. There was a tiny bit but after the second stop sign the was NO play. I couldn't move it. What did I do wrong and how do I fix it?<br><div><br></div>Sent from my iPhone<br>------------------------<br><div><br></div>spridgets@autox.team.net<br><div><br></div>Donate: http://www.team.net/donate.html<br>Suggested annual donation: $12.75<br><div><br></div>Archive: http://www.team.net/archive<br>Forums: http://www.team.net/forums<br>Unsubscribe/Manage: http://autox.team.net/mailman/options/spridgets/ryan.kubanoff@comcast.net<br></div><div><br></div></div></body></html>