<div dir="ltr"><div><div><div><div>I am getting ready to retune my carbs, and noticed my "improvement" to the cable routing. I don't recall if I had shared it to the lists or not, so here goes, possibly a second time.<br></div>I had a problem with my original cable hitting the inside of the bonnet, as well as binding up, going under the front wing, to get to the opening in the footwell. This would not be an issue for those with a RHD car. <br></div>What I did, was get two of the brake elbows, found on almost EVERY Wal Mart/China bike out in this world. It is made of aluminium, and lined with Teflon, or something similar. I put it at the end of each cable, effectively reducing the arch at both ends, and reducing the friction, for pedal pressure. <br></div>If you don't happen to have one of these elbows, perhaps you can go to your local scrap metal yard, and see if they will allow you to go out to their pile, and you KNOW you will find a Chinese bike there somewhere. (Right now, Frank is nodding his head in heaven). If you need a photo of what I am talking about, I can send you one, just ask. And if you can't find the elbows, I can try to get to my scrap yard on Fridays, and get what is there. <br><br><br></div>Brad<br clear="all"><div><div><div><div><div><br>-- <br><div class="gmail_signature">DON JULIO 1942<br><br><a href="http://tequilabrad.com/" target="_blank">http://tequilabrad.com/</a></div>
</div></div></div></div></div></div>