<html>
<head>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 12pt;
font-family:Calibri
}
--></style></head>
<body class='hmmessage'><div dir='ltr'>hey all,<BR> <BR>I was hoping someone out there would happen to know the torque specs for and aluminum head.<BR>It's a 1275, I believe a Pierce head. I've run it about 500 miles or so since it was installed so,<BR>I figured that I should re-torque the head.<br>I went through my personal archives and didn't see any mention of it.<BR>I've sent an email to the guy that built it, but haven't had a reply in a few days,<BR>and I know many of you are running them, so I thought I would ask the guru's of the Spridgets list.<BR> <BR>Also,<BR>I should check the valve lash also,<BR>any ideas of the clearance for that?<BR>It has a Kent 276 cam and Titan 1.5 roller rockers.<BR>It runs great, although the rockers do seem a bit noisy.<BR> <BR>Thanks!<BR><br>Brian S.<br>Bugeyeracer finally resto'ed!<br>Thanks to Frank C.!<br> <BR> </div></body>
</html>