[Spridgets] Bugeye rear brakes

[AOL Mail Update (Terms & Policy)]

 See spot...see spot run?Ok!Wrong spot!ChuckRemember the question was "test"?Frank's response was "tickle"!
    On Thursday, June 6, 2024 at 09:48:05 AM EDT, Rick Fisk via Spridgets <spridgets at autox.team.net> wrote:  
 
 Ryan,
Post a photo of the brake setup with the drum removed.  Maybe we can spot the issue.
Rick

On Jun 5, 2024, at 8:36 PM, Ryan Kubanoff via Spridgets <spridgets at autox.team.net> wrote:



 
 I am trying to replace the rear brake pads on my 1960 bugeye. After replacing them with new brake pads from Moss I can not get the drums to sit flush on the hub and they are really tight. I have lowered the adjuster to its lowest position, removed the e-brake tension and the brakes piston is at its lowest compression and the pads rub so tight on the inside of the drum that they stop the wheel from turning.       can someone offer some suggestions?  ------------------------

spridgets at autox.team.net

Donate: http://www.team.net/donate.html
Suggested annual donation: $12.75

Archive: http://www.team.net/pipermail/spridgets  http://autox.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/spridgets/refisk@chartermi.net
------------------------

spridgets at autox.team.net

Donate: http://www.team.net/donate.html
Suggested annual donation: $12.75

Archive: http://www.team.net/pipermail/spridgets  http://autox.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/spridgets/crusaderchuck55@aol.com
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/spridgets/attachments/20240606/9f405801/attachment.htm>