[Spridgets] SU carb rebuild

[Jim Ryan]

Great advice!  Wish I had that (and the internet) in 1974 when I rebuil
the  engine in my BJ7. It did start afterwards...;+}

On Thu, Nov 30, 2023, 3:25 PM Kent McLean via Spridgets <
spridgets at autox.team.net> wrote:

> Linda Grunthaner wrote:
>
> > I will be rebuilding my SU carbs for my 1275 this winter as I have my kit
> > from Joe Curto and multiple pages from this list via our dear friend
> Frank
> > on doing it properly.
> >
> > If anyone has new suggestions please post. I think the most important
> thing
> > to do is one carb at a time not take everything apart as each piston of
> the
> > carb must stay in the same chamber and housing.
>
> Take pictures as you take things apart. Lots of pictures. Pictures from
> several angles. Digital film is cheap. Good luck.
>
> ------------------------
>
> spridgets at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation: $12.75
>
> Archive: http://www.team.net/pipermail/spridgets
> http://autox.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/spridgets/ryan@jimryan.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/spridgets/attachments/20231130/dc41511a/attachment.htm>