[Spridgets] 76 MidgetFront suspension

[CosmicMag1380]

The tool that many are mentioning is called a "hand impact" tool around
here. Well worth their humble price! An old mechanic gave me some good
advice many years ago on the subject. He said to give it a good face on
smack with a decent hammer to try to break the rust/corrosion bond and
afterward give it a go with the wrench, trying to tighten it, as any
movement would further break the bond that has formed. Apply your favorite
penetrating oil and work it back and forth a little at a time. I have used
this method several times with success.

YMMV

On Mon, Jun 19, 2023 at 2:02 PM Larry Macy via Spridgets <
spridgets at autox.team.net> wrote:

> Any one have a secret for getting the stupid 1/2 inch clamp bolt out of
> the top of the suspension?  Trying to install new bushings and the clamp
> bolt is stuck in the shock arm end.
>
> Thanks
> Larry
>
> Sent from my iPhone
>
>
> Sent from my iPhone
> ------------------------
>
> spridgets at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation: $12.75
>
> Archive: http://www.team.net/pipermail/spridgets
> http://autox.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/spridgets/cosmicmag1380@gmail.com
>


-- 
Kent
1960 Bugeye
1983 Garage full of spridget parts!
2017 Home built shed full of excess spridget parts!!!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/spridgets/attachments/20230620/efb201d5/attachment.htm>