[Spridgets] SU AUD 136t carbs

[Charles Reel]

I second the thought. Single HIF

Sent from my iPhone

On Sep 13, 2022, at 10:18 AM, Derf via Spridgets <spridgets at autox.team.net> wrote:


For a driver a single HIF is really hard to beat.

On Tue, Sep 13, 2022 at 9:03 AM Rick Fisk via Spridgets <spridgets at autox.team.net<mailto:spridgets at autox.team.net>> wrote:
Hi Mike,

I don't have a spare set of carbs to sell, but wanted to pass on some carb info based on my experiences with SU carbs.  The HS2's are all pretty similar and any will work no matter what the AUD number.  Worn throttle shafts can be fixed 99% of the time by simply replacing the throttle shaft.  The carb body itself does not wear out, only the shaft.  So no worries about installing bushings.  I buy carb rebuild kits from MiniSpares in England for considerably less than what the guys here in the US sell them for.  The kits genuine SU parts and are very complete with new throttle shafts, throttle plates, etc.  Shipping is very fast and not too expensive.  They use DHL Express for shipping and stuff ordered from them usually arrives in 3-4 days rather than the 7-10 days when ordering from Moss.

Rick

> On Sep 13, 2022, at 1:27 AM, Mike Rambour via Spridgets <spridgets at autox.team.net<mailto:spridgets at autox.team.net>> wrote:
>
>   So I am poking around for SU AUD 136 carbs to fit my 1098 junkyard motor that came with no carbs.  I found some on Ebay that looked ok in pictures and bought them, a few hours later the seller said he didn't have them, that was a old listing that Ebay had put back up accidentally.
>
>  There are a few other listings, some missing parts and one saying many moveable parts are stuck, well that is what was wrong with a set a carbs i got from a friend, everything stuck and too badly corroded to ever work again...major pits in venturi area by the butterflies on one and pistons on both...way too bad for a rebuild.
>
>  There are some on ebay that claim to be rebuilt for a 1098cc motor but they are not AUD 136's so I am not sure what will and will not work, they all kind of look the same to me, I just know my motor had AUD 136t's originally.
>
>  Anyone have a set to sell ? ideally something with nothing frozen and a decent throttle shaft since I don't have the ability to ream and put bushings in (although i know there are o-ring shafts now that may solve that problem).
>
>  I do have a manifold, not sure its the right one but it fits, it does not have the port for the PCV valve which I think is correct for 1098, this is not a show car, I just want a good driver.   I have seen that Mo$$ has new ones...yike$ and there is a advantage to that since I would not need to buy a rebuild kit.
>
>      Mike
>
> --
> A gun is like a parachute, if you need one but don't have it,
> you'll probably never need one again.
>
> ------------------------
>
>

------------------------

spridgets at autox.team.net<mailto:spridgets at autox.team.net>

Donate: http://www.team.net/donate.html
Suggested annual donation: $12.75

Archive: http://www.team.net/pipermail/spridgets  http://autox.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/spridgets/derf247@gmail.com
------------------------

spridgets at autox.team.net

Donate: http://www.team.net/donate.html
Suggested annual donation: $12.75

Archive: http://www.team.net/pipermail/spridgets  http://autox.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/spridgets/creel906@msn.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/spridgets/attachments/20220913/1a8a58b4/attachment.htm>