[Spridgets] Valve Spring Retainers

[brian S]

So,
I pulled my Valve Cover yesterday. Was planning to modify it for more Breathing. Has a Lot of Blowby, but that's for another post. 😉
I happen to see a piece of metal between the rockers on the top of the head. Thinking WTF is that from?
Move around to the other side of the engine and see pic #2, Well crap, that's not good.
Car ran fine the night before. Guess I got lucky that what was left still held on to get me home.
I believe they are Titanium Retainers. Super light, and not bendable.
Don't know a ton about this engine.
What I do know.
built in 2000. I acquired it in 2014. Sat unused awaiting owner to install in a Bugeye Project and passed away.
1275, .030 over, 9.75:1,  Kent 266 cam w/ Belt drive, 1.5:1 roller rockers. Pierce Alum head, HS2s w ported intake.
Don't know Spring manufacturer.
How do I go about finding a replacement Retainer? Do I have to get a full set? Titanium ones are $200+ a set
If I have to get a full set, can I use hardened Steel ones? Engine doesn't see 8000 rpm, 7000 occasionally. 😉
Any insight appreciated.

Thanks,


Brian S.
Bugeyeracer resto'ed Thanks to Frank C.!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/spridgets/attachments/20220528/bff23e78/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20220527_202357.jpg
Type: image/jpeg
Size: 4167287 bytes
Desc: 20220527_202357.jpg
URL: <http://autox.team.net/pipermail/spridgets/attachments/20220528/bff23e78/attachment-0002.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20220527_202213.jpg
Type: image/jpeg
Size: 3260369 bytes
Desc: 20220527_202213.jpg
URL: <http://autox.team.net/pipermail/spridgets/attachments/20220528/bff23e78/attachment-0003.jpg>