[Spridgets] Brake Bleed p.s.

[Rick Fisk]

Hi Mike,

Do you have the proper clearance on the master pushrod at rest?

Rick

> On Jan 18, 2022, at 2:41 PM, Michael MacLean via Spridgets <spridgets at autox.team.net> wrote:
> 
> 
> It's  a new AP Lockheed master.
> Mike
> 
>> On Tue, Jan 18, 2022, 10:38 AM Bert Shirey via Spridgets <spridgets at autox.team.net> wrote:
>> Mike, This is probably apparent, but if the hose pinching doesn’t, work, the MC is likely the culprit. Don,t bet a new or rebuilt one is ok. On that A project we sent the old MC off to have it re sleeved and rebuilt. We should have inspected it before putting it in, but didn’t do that. After putting everything back together, we found that the MC had the incorrect internal parts. Bert Shirey. 
>> 
>> Sent from my iPad
>> ------------------------
>> 
>> spridgets at autox.team.net
>> 
>> Donate: http://www.team.net/donate.html
>> Suggested annual donation: $12.75
>> 
>> Archive: http://www.team.net/pipermail/spridgets  http://autox.team.net/archive
>> 
>> Unsubscribe/Manage: http://autox.team.net/mailman/options/spridgets/springer.mike51@gmail.com
> ------------------------
> 
> spridgets at autox.team.net
> 
> Donate: http://www.team.net/donate.html
> Suggested annual donation: $12.75
> 
> Archive: http://www.team.net/pipermail/spridgets  http://autox.team.net/archive
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/spridgets/refisk@chartermi.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/spridgets/attachments/20220118/414a5e87/attachment.htm>