[Spridgets] Does this look right?

[Charles Ruggiero]

I would remove that fitting and replace it with a flush / low profile fitting. you will need a grease gun adapter fitting. plenty of styles for sale on line. Only a couple bucks at the auto parts or on line, but better than having that long neck get broken or through the joint out of balance.
Charlie R.

________________________________
From: Spridgets <spridgets-bounces at autox.team.net> on behalf of Ryan via Spridgets <spridgets at autox.team.net>
Sent: Wednesday, June 30, 2021 10:31 AM
To: Spridgets <spridgets at autox.team.net>
Subject: [Spridgets] Does this look right?

Had I joints replaced at machine shop and it can back like this??? On a 74 midget  the other one is tiny
[cid:b1b54e5a-c343-46c1-be1f-9b7c6b34ff94 at namprd07.prod.outlook.com]


Sent from my iPhone
------------------------

spridgets at autox.team.net

Donate: http://www.team.net/donate.html
Suggested annual donation: $12.75

Archive: http://www.team.net/pipermail/spridgets  http://autox.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/spridgets/charles_ruggiero@hotmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/spridgets/attachments/20210630/591875e2/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image0.jpeg
Type: image/jpeg
Size: 111965 bytes
Desc: image0.jpeg
URL: <http://autox.team.net/pipermail/spridgets/attachments/20210630/591875e2/attachment.jpeg>