[Spridgets] Spridget hoods?

[crusaderchuck55 at aol.com]

Ok,My aplication only has 2 bolts (70 Midget) and the 2 rust free hoods I recieved today have 4 bolt holes per side like my bugeye hinges use.  So ok 2 per side should line up.Btw,the 2 hoods are prop rod hoods and my application originally used the telescopic support thingy.   Since both types of hood support depended upon mounting to the right fender lip , which with fiberglass fenders I can not use either support....but I might be able to use the prop rod somehow.   The telescopic one is completely out.Thank you!ChuckThe 1 hood is off a race car with pin holes & plates on 4 corners.Sent from my LG Mobile------ Original message------From: Rick FiskDate: Sat, Feb 22, 2020 9:16 PMTo: crusaderchuck55 at aol.com;Cc: spridgets at autox.team.net;EasternOshitGroup at groups.io;Subject:Re: [Spridgets] Spridget hoods?They all match up no matter what type of hood or hinge.Sent from my keyboardOn Feb 22, 2020, at 9:05 PM, crusaderchuck55--- via Spridgets <spridgets at autox.team.net> wrote:








    Do early hoods for the 4 bolt style hinge fit into a later scissors type hood hinge?What I'm curious about is , do 2 of the 4 threaded bolt holes for early hinges match up to the later hinges?  Or , do I need to modify an early hood to fit a later car with reguard to the hinges?Thank you...all!ChuckSent from my LG Mobile


------------------------spridgets at autox.team.netDonate: http://www.team.net/donate.htmlSuggested annual donation: $12.75Archive: http://www.team.net/pipermail/spridgets  http://autox.team.net/archiveUnsubscribe/Manage: http://autox.team.net/mailman/options/spridgets/refisk@chartermi.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/spridgets/attachments/20200222/c8cde12d/attachment-0001.htm>