[Spridgets] Intake/exhaust manifold gasket ?

[George]

948

> On Feb 16, 2020, at 12:41 PM, crusaderchuck55--- via Spridgets <spridgets at autox.team.net> wrote:
> 
> What motor?
> Generally I've never used any sealer on that gasket.  If it's a 1275 the 2 rings that positively locate the intake need to be obviously properly aligned to fit both the head & intake. 
> Chuck
> 
> Sent from my LG Mobile
> 
> ------ Original message------
> From: George Castleberry via Spridgets
> Date: Sun, Feb 16, 2020 2:05 PM
> To: spridgets at autox.team.net;
> Cc:
> Subject:[Spridgets] Intake/exhaust manifold gasket ?
> 
> < /div>
> I am installing new carbs on my 59 Bugeye.  I’ve got Ultra Copper for the manifold gasket.  Should I put the Ultra Copper on both sides of the gasket?
> 
> It is fiber on both sides.
> 
>  
> 
> GeorgeC
> 
> 59 Bugeye
> 
> Tucson
> 
> ------------------------
> 
> spridgets at autox.team.net
> 
> Donate: http://www.team.net/donate.html
> Suggested annual donation: $12.75
> 
> Archive: http://www.team.net/pipermail/spridgets  http://autox.team.net/archive
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/spridgets/leavcast@gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/spridgets/attachments/20200216/4a5349f3/attachment.htm>