[Spridgets] Bugeye boot panels

[Tom Springer]

I'm inclined to use alloy sheet.  I use the original as a pattern, cut to size, tape the edges, cover with a thin foam backing, then use the original vinyl.  I haven't done this on the back side of a Sprite, but on many other British cars.
Tom 
> On February 5, 2020 at 8:33 AM JMFangio via Spridgets <spridgets at autox.team.net> wrote:
> 
> 
> Good Morning all,
> 
> so I took a look at the inside of the boot and the cardboard panels that were so nice when installed many years ago have slumped and look terrible.  I was wondering if any of you fine folk had or had considered using fiberglass resin to reinforce them?  
> 
> My thought is to get them flat-ish and paint the backside with resin.
> 
> What say you all?
> 
> Lester
> 
> ------------------------
> 
> spridgets at autox.team.net
> 
> Donate: http://www.team.net/donate.html
> Suggested annual donation: $12.75
> 
> Archive: http://www.team.net/pipermail/spridgets  http://autox.team.net/archive
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/spridgets/tomspringer@comcast.net