[Spridgets] Daves MGA

[crusaderchuck55 at aol.com]

Determine if it's the tie rod or the tie rod and.Neither are too hard to tackle.   The frightening part of both tie rods ball socket end and tie rod ends ball socket is they wear so far and then can literally with the right pot hole or road irregularity these can pop apart due to the impact.   It's best advised to determine which part is the one that has play in it and get one ordered.   If it's the tie rod itself do yourself a favor and order a rack boot to go with the job.   There is nothing more frustrating than expecting to just replace the tie rod...and find the boot is full of cracks you were unaware of or even worse.....you damage the boot and need to order 1 and wait for it to arrive...Been there , done that.....learned through torture to check 3 times and order once...ChuckSent from my LG Mobile
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/spridgets/attachments/20200419/54f7d107/attachment.htm>