[Spridgets] Double bearing rear hubs

[Weslake1330]

Time to fit 8 inch drums and not have that equalising bar.  Or modify to
fit.  Over here there's no need for a handbrake on a hillclimb car because
the starter's assistant holds the car with a wedge under one of the back
wheel/tyres.

On Mon, 15 Jul 2019 at 23:08, Rick Fisk via Spridgets <
spridgets at autox.team.net> wrote:

> Never seen a parking brake on a Spridget with double bearing hubs.  No
> room for the standard mechanism.  Might be easier to engineer something
> that grabs the driveshaft.
>
>
>
> Sent from my keyboard
>
> On Jul 15, 2019, at 5:50 PM, crusaderchuck55--- via Spridgets <
> spridgets at autox.team.net> wrote:
>
> I'm in the process of upgrading the rear axle in Frank's Midget.   I have
> a set of Winners Circle
> Double bearing hubs.  I need a functional emergency brake for staging at
> hillclimbs.  I see a big problem with the hub interfering with the
> emergency brake equalizing bar and the brake return spring.  I see lots of
> re-engineering to get this all to come together and function.  Anyone go
> through this previously?
> Any constructive input will be well recieved.
> Thank you!
> Chuck
> *Sent from my LG Mobile*
>
> ------------------------
>
> spridgets at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation: $12.75
>
> Archive: http://www.team.net/pipermail/spridgets
> http://autox.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/spridgets/refisk@chartermi.net
>
> ------------------------
>
> spridgets at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation: $12.75
>
> Archive: http://www.team.net/pipermail/spridgets
> http://autox.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/spridgets/weslake1330@gmail.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/spridgets/attachments/20190716/2562ebf5/attachment.html>