[Spridgets] Rocker install question
JMFangio
oldsaabguy at comcast.net
Tue Jul 9 13:14:06 MDT 2019
Thanks for the responses guys!
Plan is to :
Back off all the adjusters
Loosen all the head bolts
Remove the head blots to the rocker pillars
Adjust the clearance
Enjoy the sweet music of a properly running engine.
Look down the spark plug holes with a scope to check for piston damage.
Curse that I will have to remove the head anyway
Curse that if I had installed my rebuild with the 1098 stroker crank I could have been driving this car.
YMMV
Lester
> On Jul 7, 2019, at 2:59 PM, Lester Ewing via Spridgets <spridgets at autox.team.net> wrote:
>
> Hi all!
>
> So I have asked this question before but I can’t find/remember the answer so here goes:
>
> Do I need to undo all of the head bolts to remove those that hold the rocker inn place and then re-torque or can I just undo the ones that hold the rocker arm in place and reinstall them ?
>
> Thanks,
>
> Lester
>
>
> ------------------------
>
> spridgets at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation: $12.75
>
> Archive: http://www.team.net/pipermail/spridgets http://autox.team.net/archive
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/spridgets/oldsaabguy@comcast.net
More information about the Spridgets
mailing list