[Spridgets] Rear hub nut torque
Rick Fisk
refisk at chartermi.net
Tue Jun 12 16:50:13 MDT 2018
Those I installed last month were brandy new. The old ones had been removed and installed a number of times using nothing but a Harley tool kit. (2 pound hammer, 5 pound hammer, 10 pound hammer) :-)
Sent from my keyboard
> On Jun 12, 2018, at 4:26 PM, Ron Soave <soavero at yahoo.com> wrote:
>
> Indeed! I also don’t re-use them. I buy in bulk for on British Parts Northwest.
>
> Ron Soave
>
>> On Jun 12, 2018, at 2:36 PM, Rick Fisk via Spridgets <spridgets at autox.team.net> wrote:
>>
>> Torqued the nuts on my Bugeye hubs to 140 last month - no problems. Look up the specs on that nut and you'll find 140 is well within it's capabilities. It's a BIG nut. :-)
>>
>> Rick
>>
>> Sent from my keyboard
>>
>>> On Jun 12, 2018, at 1:55 PM, crusaderchuck55 at aol.com via Spridgets <spridgets at autox.team.net> wrote:
>>>
>>> I'm reading 140ft lbs. Really? I'm also reading frequent accounts of stripping the housing threads at that value. Any experiences to share...or lower torque values & why?
>>> Chuck
>>>
>>> Sent from my LG Mobile
>>> ------------------------
>>>
>>> spridgets at autox.team.net
>>>
>>> Donate: http://www.team.net/donate.html
>>> Suggested annual donation: $12.75
>>>
>>> Archive: http://www.team.net/pipermail/spridgets
>>>
>>> Unsubscribe/Manage: http://autox.team.net/mailman/options/spridgets/refisk@chartermi.net
>> ------------------------
>>
>> spridgets at autox.team.net
>>
>> Donate: http://www.team.net/donate.html
>> Suggested annual donation: $12.75
>>
>> Archive: http://www.team.net/pipermail/spridgets
>>
>> Unsubscribe/Manage: http://autox.team.net/mailman/options/spridgets/soavero@yahoo.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/spridgets/attachments/20180612/7e4a79a7/attachment.html>
More information about the Spridgets
mailing list