[Spridgets] MKIII Midget Brake failure switch.... and wiring question

[bmwwxman]

Here we go!!!   Lotsa questions as I start reassembly....

1.  I cannot seem to find much info on the 4 way brake failure switch.  I
know there is a little shuttle inside the housing but not sure how to set
it up properly as I connect the 5 hydraulic brake lines to it.  Nothing
useful that I can find in Bentley or my Haynes manual.  Also, this switch
appears to be different than some of the ones shown in the manuals. My
hydraulic lines attach to an "H" shaped
brass(?) housing along with the line from the master cylinder. I don't find
any online information on this set-up so any advice would be welcome.

2.  Wiring Harness....   I got a new one from Vickey Brit as the old one
was awfully ragged with a lot of cracked insulation.  The wiring diagram in
my Bentley manual doesn't seem to look anything like the color codes on the
harness.  Anyone have any experience with these??
-- 
-- 
Cheers!!
Jim Johnson
68 Midget (Frank) going back together!!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/spridgets/attachments/20180717/4314cc7a/attachment.html>