[Spridgets] A spridget question about rear hubs

[Bob Kitterer]

The diff housing is one inch narrower for the wire wheels. This keeps the rear tread the same as foe disk wheels.

Bob  Kitterer

1960 Austin Healey Sprite (Mk IV in disguise)
1966 Austin Healey Sprite Mk III (Trevor) - still in boxes
2013 Miata

Pay it Forward
Thanks Frank


> On Jan 25, 2018, at 7:36 PM, Trevor Jessie via Spridgets <spridgets at autox.team.net> wrote:
> 
> on the MGexperience, someone pointed out to me that there are different part numbers for rear hubs on a wire wheel car than a disc wheel car.  What is the difference?  I thought only the housings were different.
> 
> Thanks,
> Trevor
> ------------------------
> 
> spridgets at autox.team.net
> 
> Donate: http://www.team.net/donate.html
> Suggested annual donation: $12.75
> 
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/spridgets/bkitterer@me.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/spridgets/attachments/20180125/0d13c8ca/attachment.html>