[Spridgets] Crossflow radiator request

[crusaderchuck55@aol.com]

<!-- P {margin-top:0;margin-bottom:0;} -->

    Thank you Jack!That is exactly what I needed to know.   I can fabricate the tube and solder accordingly now.Again,Thank you!Chuck
Sent from my LG Mobile



------ Original message------From: Orkin, Jack LDate: Mon, Aug 13, 2018 1:51 PMTo: Weslake1330;spridgets at autox.team.net;Cc: crusaderchuck55 at aol.com;Subject:Re: [Spridgets] Crossflow radiator request
Hope this helps and hope it gets where its supposed to go.  I usually lurk but I'll try to get this to the group.This the radiator from my '74 1275.  The overflow nipple is about 1" from the bottom edge, or about 1.5" center to center of the rad. hose connection.  Be aware that the nipple is really a copper pipe with a 90* angle and it opens at the very top of the tank.  
Cheers,Jack

From: Spridgets > on behalf of Weslake1330 via Spridgets >
Sent: Monday, August 13, 2018 11:39 AM
To: crusaderchuck55 at aol.com
Cc: spridgets at autox.team.net
Subject: Re: [Spridgets] Crossflow radiator request I've seen two different positions so not sure which is correct.  I'm guessing as near the top as you can get and top or side will all work ok.
On Sun, Aug 12, 2018 at 4:51 PM, crusaderchuck55 at aol.com via Spridgets <spridgets at autox.team.net> wrote:
Can anyone send me a picture of the top left side of their radiator?Mine was modified a long time ago for no expansion tank and the place for the tank to radiator nipple was filled.  I'm going to need to drill it open and solder in a new one.But where?
Sent from my LG Mobile
------------------------

spridgets at autox.team.net

Donate: http://www.team.net/donate.html
Suggested annual donation: $12.75

Archive: http://www.team.net/pipermail/spridgets

Unsubscribe/Manage: http://autox.team.net/mailman/options/spridgets/weslake1330@gmail.com




This e-mail message (including any attachments) is for the sole use of
the intended recipient(s) and may contain confidential and privileged
information. If the reader of this message is not the intended
recipient, you are hereby notified that any dissemination, distribution
or copying of this message (including any attachments) is strictly
prohibited.

If you have received this message in error, please contact
the sender by reply e-mail message and destroy all copies of the
original message (including attachments).
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/spridgets/attachments/20180813/a4c8818c/attachment.html>