[Spridgets] Fwd: Brakes
EDWARD WOODS
fogbro1 at comcast.net
Tue Jul 4 13:42:13 MDT 2017
Moss calls it a "universal" flare. Is there any supplier of a die set that will produce the original British "bubble" flare? Is the DIN 4.5mm convex compatible?
Ed
> On July 4, 2017 at 2:55 PM WeslakeMonza1330 at aol.com wrote:
>
> Check you have the correct flare on the rigid lines.
>
> In a message dated 04/07/2017 19:02:09 GMT Daylight Time, spridgets at autox.team.net writes:
>
> > > Egg on my face. Major culprit was a new leak at the joining of the flex line and rigid line at the r/f brake caliper. Also some evidence of seepage at the rigid line and brake cylinders of both rear brakes. Tightening fixed the caliper leak. It did not fix the rear leaks. I am going to replace the rear rigid brake lines (again).
> >
> > >
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/spridgets/attachments/20170704/3eb405bd/attachment.html>
More information about the Spridgets
mailing list