[Spridgets] Replacing valve train.

Rick Fisk refisk at chartermi.net
Sat Sep 3 05:27:13 MDT 2016


You have to loosen them all and retorque.  Probably best to replace the head gasket.  Don't forget to drain the coolant before you loosen the head bolts.

Sent from my keyboard

> On Sep 2, 2016, at 6:15 PM, Lester via Spridgets <spridgets at autox.team.net> wrote:
> 
> Hello again all,
> 
> so I have my valve train assembly ready to swap out BUT to install I have to undo the pedestal nuts and the cylinder head nuts that hold the pedestals in place. 
> 
> Should I loosen ALL of the head bolts  and retorque everything or just retorque the ones on the pedestals?
> 
> Thanks again in advance,
> 
> Lester
> ------------------------
> 
> spridgets at autox.team.net
> 
> Donate: http://www.team.net/donate.html
> Suggested annual donation: $12.75
> 
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/spridgets/refisk@chartermi.net


More information about the Spridgets mailing list