[Spridgets] Head Stud Torque Setting

[Peter Caldwell]

In those desperate times at a race, you loosen adjusting nuts and slide 
the rocker to the side, unless you have solid spacers.

On 11/28/2015 11:27 AM, rrengineer.mike wrote:
> I am not pulling the head. I may be wrong, but I have to remove the 
> head Stud nuts on the pedastals to lift the rocker assembly off the 
> engine to replace the pushrods.  I'm thinking the other stud nuts have 
> to be loosened also to re-torque the head properly. Is there another 
> way to replace the pushrods without loosening all the head nuts in 
> sequence?
> Mike MacLean
>
>
>
> Sent via the Samsung GALAXY S® 5, an AT&T 4G LTE smartphone
>
>
> -------- Original message --------
> From: Peter Caldwell via Spridgets <spridgets at autox.team.net>
> Date: 11/28/2015 6:30 AM (GMT-08:00)
> To: spridgets at autox.team.net
> Subject: Re: [Spridgets] Head Stud Torque Setting
>
> Why pull the head at all?
>
>
> -- 
> Peter Caldwell
> World Wide Auto Parts of Madison WI
> 2517 Seiferth Rd
> Madison  WI  53716
> (608)223-9400
> www.nosimport.com
> http://stores.ebay.com/worldwideimportautoparts
>
> ------------------------
>
> spridgets at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation: $12.75
>
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/spridgets/rrengineer.mike@att.net

-- 
Peter Caldwell
World Wide Auto Parts of Madison WI
2517 Seiferth Rd
Madison  WI  53716
(608)223-9400
www.nosimport.com
http://stores.ebay.com/worldwideimportautoparts

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/spridgets/attachments/20151128/f35cb482/attachment.html>