[Spridgets] 995 Huffaker race engine question

Gerard pixelsmith at gerardsgarage.com
Tue Mar 31 13:42:55 MDT 2015


That fix works because you are restoring the tolerance I referred to in my earlier post. However, if it doesn’t work or you screw it up, you will be buying a very expensive replacement main cap and half moon piece, which will then need to be line bored to the engine to fit.

Gerard

> On Mar 31, 2015, at 11:00 AM, spridgets-request at autox.team.net wrote:
> 
> Message: 5
> Date: Mon, 30 Mar 2015 17:48:05 -0500
> From: Ron Soave <soavero at yahoo.com <mailto:soavero at yahoo.com>>
> To: "bmwwxman ." <bmwwxman at gmail.com <mailto:bmwwxman at gmail.com>>
> Cc: Spridgets List <spridgets at autox.team.net <mailto:spridgets at autox.team.net>>
> Subject: Re: [Spridgets] 995 Huffaker race engine question
> Message-ID: <4B04238F-6174-4961-B0C3-2B293A03BC72 at yahoo.com <mailto:4B04238F-6174-4961-B0C3-2B293A03BC72 at yahoo.com>>
> Content-Type: text/plain; charset="us-ascii"
> 
> I use the JB Weld fix (Paul A., now Gerard?). 5 years, no leaks. 13:1 cr. It leaked massively before that. Seal fixed the problem in 24 hours. 
> 
> Ron Soave

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/spridgets/attachments/20150331/739689be/attachment.html>


More information about the Spridgets mailing list