[Spridgets] Kingpin Bushing reamer

[Hal Faulkner]

Rick,
When I needed it done I had my local machinist do it for me.  He was quite
reasonable.  I watched Peter (or was it Paul?) do it at the Buster Cluster,
using an old king pin.  All it cost Buster was all the food and drink we
ate, plus the hot water, and everything else....  We definitely got the
better end of the deal.
Hal

On Sun, Mar 29, 2015 at 4:40 PM, Rick Fisk via Spridgets <
spridgets at autox.team.net> wrote:

> Don't know who might have a reamer other than Peter C.  He'll do the job
> for you, but I doubt he loans the reamer out.  :-)
>
> Make your own reamer from an old kingpin and an angle grinder with a thin
> cutoff blade.
>
>
>
>
> Sent from my keyboard
>
> > On Mar 29, 2015, at 6:48 PM, Mark Haynes via Spridgets <
> spridgets at autox.team.net> wrote:
> >
> > IIRC, Someone on this list had a kingpin reamer that was available for
> the cost of shipping both ways. I may be wrong, but it sticks in my head.
> Am I right? Does anyone out there have one that I can use and return? My
> MKII Sprite needs new bushings installed- I have the bushings but they need
> to get reamed after installation.
> > Can anyone help?
> >
> >
> > Mark Haynes
> > It only goes one way-Pay it Forward
> >
>
> ------------------------
>
> spridgets at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation: $12.75
>
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/spridgets/frog.aye@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/spridgets/attachments/20150329/bf202bd2/attachment.html>