[Spridgets] Corrosion protectors

[dlancer7676 at comcast.net]

I haven't been following this thread and this may have been mentioned already, but I read many years ago that reversing the polarity in the Spridgets from Positive ground to negative ground was a corrosion deterrent by making the frame negatively charged. 

--David C. 

----- Original Message -----

From: "Mark Haynes" <haynes386 at netzero.net> 
To: "Spridgets" <spridgets at autox.team.net> 
Sent: Friday, December 5, 2014 5:58:14 PM 
Subject: Re: [Spridgets] Corrosion protectors 

Wait, There was a battery tray originally? 


Mark Haynes 
It only goes one way-Pay it Forward 



Tongue is hurting so had to throw this out there for the "originality" 
personalities. The original battery tray was bakelite and isnt available 
from 
any supplier in the dimensions that fit a bugeye BUT if you order a BN2 
battery tray from AH Spares ( hard phenolic resin closely resembling 
bakelite) 
and cut 1" out of the middle ( width not length) and then epoxy it back 
together you can have an "original" looking battery tray :) 

Leo 
____________________________________________________________ 
What's your flood risk? 
Find flood maps, interactive tools, FAQs, and agents in your area. 
------------------------ 

spridgets at autox.team.net 

Donate: http://www.team.net/donate.html 
Suggested annual donation: $12.75 

Archive: http://www.team.net/archive 
Forums: http://www.team.net/forums 
Unsubscribe/Manage: http://autox.team.net/mailman/options/spridgets/dlancer7676@comcast.net