[Spridgets] Bugeye Rear Spring Bushing

[fogbro1 at comcast.net]

List, 



After fitting a new Moss bushing to the Bugeye's rear spring, I found that it's a very loose fit to the pin (7/16" bolt); very unlike the original. Anyone else find this problem? What's the fix? Is there another source that has the correct part? The inner sleeve is bonded to rubber, so fixing the current bushing is probably not an option. 



Is there any source for the "pin", the one that passes through the bushing and secures the spring to the diff assembly? 



Thanks, 



Ed Woods