[Spridgets] Distributor drive shaft removal

Derf derf247 at gmail.com
Sat Apr 6 04:26:25 MDT 2013


Pull gently while twisting and/or while a lovely assistant gently turns the
motor by hand.




On Apr 5, 2013, at 4:35 PM, Hal Faulkner <frog.aye at gmail.com> wrote:

> Any secrets?  I've run a 5/16-28 bolt into the threaded hole in the
> center.  The distributor mounting collar that fits down into the block is
> outta there.  But the drive shaft won't come out, it gets so far and
> appears to hit an impasse.  I know it went in that way but it just doesn't
> want to  come out.  Is it just a matter of getting it aligned with a hole
> where there's very little clearance?  Need it outta there so I can use the
> hole for a breather.  Don't need a distributor with a crank trigger....
>
> Hal
> ------------------------
>
> spridgets at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation: $12.75
>
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/spridgets/derf247@gmail.com


More information about the Spridgets mailing list