[Spridgets] Thermostat housing removal
derf
derf247 at gmail.com
Mon Mar 19 09:46:22 MDT 2012
A well placed tap on the base flange with a hammer and blunt punch
should do it. If not you may have to break it and chisel the pieces
off.
If corroded in place soak with PBBlaster or similar for a while. But,
it shouldn't be that hard to dislodge.
I assume you got all the bolts out. If not, do that first. Usually
in my experience if there is a problem it is with the bolts and not so
much the housing itself.
More information about the Spridgets
mailing list