[Spridgets] Quarter elliptic springs
Rick
refisk at chartermi.net
Sun Jul 22 12:06:40 MDT 2012
Took me a while to locate the email from Tom Colby. He removes leaves 2,4,6,8
on a 15 leaf spring, with number 1 being the long leaf. I imagine removing 2
and 4 on the 10 leaf spring would work. Ride height can be set by using
tapered shims under the spring where it bolts to the chassis. Shims are
available from Napa - off the shelf parts.
Rick
----- Original Message -----
From: Phil Nase
To: Rick Fisk
Cc: spridgets at autox.team.net
Sent: Saturday, July 21, 2012 9:06 PM
Subject: Re: [Spridgets] Quarter elliptic springs
Which 2 or 3 would that be?
Phil Nase
Quakertown, PA
http://home.comcast.net/~philnasecpa/
On Jul 21, 2012, at 7:41 PM, Rick Fisk wrote:
Tom Colby at Speedwell Engineering removes 4 leaves from the standard 15
leaf
spring to soften the rate to an acceptable level. Two or three leaves
removed
from the Moss "Rally" spring would probably be just about right.
Rick
More information about the Spridgets
mailing list