[Spridgets] FW: Water Temp Gauge Problem
Trevor Jessie
trevor.jessie at gmail.com
Sat Jul 14 09:35:40 MDT 2012
WARNING: You may be tempted to cool your beer in the salt water bath, but
in my opinion beer CAN be too cold.
On Fri, Jul 13, 2012 at 9:09 PM, Dean Hedin <dlh2001 at comcast.net> wrote:
> That's how I did it. Make sure you get a good salt bath to chill
> the ether bulb.
>
> Clean the tubing well so the soldering is quick and reliable.
>
> I bought the guage from Autozone. The bulb is a perfect fit.
>
> Kirk, let me know if you need assistance if your going to attempt.
>
>
> -----Original Message-----
> From: spridgets-bounces at autox.team.net
> [mailto:spridgets-bounces at autox.team.net] On Behalf Of Dean Swanson
> Sent: Thursday, July 12, 2012 10:21 PM
> To: spridgets at autox.team.net
> Cc: Dean-work
> Subject: [Spridgets] FW: Water Temp Gauge Problem
>
> Kirk,
> A friend/co-worker of mine found instructions online of how to take the
> bulb/tube off a new cheap gauge and fix the old gauge.
>
> http://www.ply33.com/Repair/tempgauge
>
> I can check at work tomorrow and see if he did anything else special...
> ------------------------
>
> spridgets at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation: $12.75
>
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/spridgets/trevor.jessie@gmail.com
More information about the Spridgets
mailing list