[Spridgets] Before I start fabricating

Dean Hedin dlh2001 at comcast.net
Tue Sep 27 22:58:36 MDT 2011


Shutup and start fabricating... :)

Take a 1" wide strip of brass sheet metal and bend it up on the vise.

As I recall it sort of looked like this...(side view)

------|______________|------

Drill accordingly to match up the top two holes on the license and the holes
on the car.  

Get a standard metal border frame to go around the license edge from local
auto store.

As I recall I just fasten the top two holes and I have a pad on the bottom. 
The lower portion of the plate is bolted to the border frame but not to the
above bracket.

I also used wing nuts on the inside to hold the above bracket to the car. 

-----Original Message-----
From: spridgets-bounces at autox.team.net
[mailto:spridgets-bounces at autox.team.net] On Behalf Of Heard Saxon
Sent: Tuesday, September 27, 2011 1:42 PM
To: Spridgets
Subject: [Spridgets] Before I start fabricating

a license plate holder for my Bugeye, it would seem I'm missing a part since
no license plate I've ever seen except maybe a motorcycle plate would fit
those holes on the back.  What am I missing?

Thanks,
Heard
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/spridgets/dlh2001@comcast.net


More information about the Spridgets mailing list