[Spridgets] Rib Case - Rebuild Question/s

[Brad Fornal]

I knew that Fisher Jones used to assemble his inside a ziplock bag, so that
the balls and springs would not go far.

On Tue, Sep 27, 2011 at 5:51 PM, Mark Haynes <haynes386 at netzero.net> wrote:

> << ...watch for the detent balls and plungers and springs.  >>
> I seem to remember that someone (Frank Maybe) used a hose clamp of
> appropriate
> size with a few of the slots cut out to hold the detent balls in place so
> that
> you can rotate the hose clamp to a hole, install a spring and ball, and
> rotate
> to the next hole, etc. then slide the outer gear over as the hose clamp
> slides
> off. then just disassemble the hose clamp. NO pain, no drama, no stinkin'
> balls flying thru the air.
>
> Mark Haynes
> It only goes one way-Pay it Forward
> HAN6L12977
> HAN5L8016
>
>
>
> ____________________________________________________________
> 60-Year-Old Mom Looks 27
> Mom Reveals Free Wrinkle Trick That Has Angered Doctors!
> http://thirdpartyoffers.netzero.net/TGL3231/4e8253a3539a78e0b59st02duc
> _______________________________________________
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/spridgets/tequila.brad@gmail.com
>
>


-- 
DON JULIO 1942

http://tequilabrad.com/