[Spridgets] Trying to figure out where to get a plug

David Ambrose stargazer1 at cox.net
Tue Nov 29 19:36:18 MST 2011


On 11/29/2011 12:58 PM, Richard Ball wrote:
> Pulled this info off of  the Spitfire/GT Magazine website.  Scroll 
> down to the section on EGR Valves.
>
> http://www.triumphspitfire.com/substitute.html
>
> Apparently it is 3/4 x 24 fine thread which is the size of the 1930 
> Ford Model A oil pan drain plug.
>
> The Air rail plugs in the head are 7/16-20 by 1/2 inch long.

For a clean installation, use Allen head set screws (aka grub screws). 
They'll seat flush with the top of the head and stay out of the way.

Cheers,
Dave Ambrose


More information about the Spridgets mailing list