[Spridgets] need a new electronic fuel pump.

Robert Weeks lists at woozy.com
Wed Nov 9 05:28:31 MST 2011


I'm looking at the box from my pump and it is labeled Made in USA. Might 
have been old stock or something, I don't know. I mounted mine back by 
the fuel tank.

Robert

On 11/8/2011 7:25 PM, jmj3351 at comcast.net wrote:
>
> The airtex fuel pump is made in China and marketed under a dozen 
> different names. I used it to replace my noisy Holley. It lasted less 
> than 200 mi. and left me setting. They replaced it under warranty and 
> I carry it as a back-up. I have a Delco EP42S running without a 
> regulator and it has a thousand mi. with no problem. It is quiet and 
> it runs 4.5 pressure at the carb. It costs a little bit more but it 
> was worth it to me. I would never trust the airtex again.
>
> John-Green midget and several others.
>
> ------------------------------------------------------------------------
>
> *From: *"ryan kubanoff" <ryan.kubanoff at comcast.net>
> *To: *"Robert Weeks" <lists at woozy.com>
> *Cc: *spridgets at autox.team.net
> *Sent: *Tuesday, November 8, 2011 6:08:01 PM
> *Subject: *Re: [Spridgets] need a new electronic fuel pump.
>
> Was there an issue with these?B  I kinda thought someone had posted 
> that there
> was a bad batch of them on the spridget list.B  Also is that mounted 
> by the
> fuel tank or up by the carbs?B  I need one by the fuel tank (pusher I 
> think).
>
> Thanks
>
> Ryan


More information about the Spridgets mailing list