[Spridgets] What's wrong with this picture?

[kgb at frontiernet.net]

I got my wheel bearings from NAPA. They fit fine & were quite a bit cheaper than Mo$$.

Kate

----- Original Message -----
From: corvallis at peoplepc.com
To: spridgets at autox.team.net
Sent: Monday, November 7, 2011 9:52:19 AM
Subject: Re: [Spridgets] What's wrong with this picture?

Is it the front wheel bearings you are replacing? Look at this link; just
the first half refers to the Spridget. I used this information for my 1979. 
http://www.mgexperience.net/article/mg-midget-wheel-bearings.html
I used the Moss bearings on the advice of an experienced Spridget person.
Worked fine. 
=====================================================
-----Original Message-----
From: spridgets-bounces at autox.team.net
[mailto:spridgets-bounces at autox.team.net] On Behalf Of Robert Weeks
Sent: Monday, November 07, 2011 9:03 AM
To: spridgets net
Subject: [Spridgets] What's wrong with this picture?

This sort of thing drives me nuts, especially since I have a very 
limited amount of time to work on my Midget. You'd think if you order a 
part from a supplier that it would be a suitable replacement for the 
part you are replacing.

Check out the top view:

http://www.white-weeks.com/wp-content/uploads/2011/11/heater-pipes.jpg

Big thankyou(not) to Victoria British.

I need to order some wheel bearings and would like them to actually fit. 
Any suggestions on a supplier? Oh and I like to get the correct heater 
pipe at some point too ;-)

Thanks,

Robert
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/spridgets/corvallis@peoplepc.com
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/spridgets/kgb@frontiernet.net