[Spridgets] Replacement Floors - Recommendations*

[Bill Masquelier]

Anyone know if the floors for a '64 would fit a '65? What changed?
BillM

> Date: Fri, 13 May 2011 12:16:44 +0000
> From: dlancer7676 at comcast.net
> To: grunthaner at gmail.com
> CC: spridgets at autox.team.net
> Subject: Re: [Spridgets] Replacement Floors - Recommendations*
>
> But be sure to stress "No Oriental Parts" when you order--order by phone so
> you can talk with someone.B  Again, I'm not sure they still handle anything
> not oriental, but that's what I would do again.B
>
> --David C.
> THE SENILITY PRAYER : B Grant me the senility to forget the people
> B I never liked anyway,
> B The good fortune to run into the ones I do, and
> B The eyesight to tell the difference.
>
>
>
>
> ----- Original Message -----
> From: "Linda Grunthaner" <grunthaner at gmail.com>
> To: dwoerpel at wi.net, "Jay Fishbein" <jfishbein at snet.net>
> Cc: dlancer7676 at comcast.net, "Spridgets" <spridgets at autox.team.net>
> Sent: Thursday, May 12, 2011 10:45:16 PM
> Subject: Re: [Spridgets] Replacement Floors - Recommendations
>
> Jay, List,
> I bought this one from a guy who makes them in Michigan same price $99.
Looks
> good out of the box but I'll know more when I try to fit it on the Sprite.
If
> I don't like the fit and I can't massage it to my liking I'll buy another
set
> from Vicky (Frank's name for Victoria British). I'll keep you posted.
> Lin
> http://tinyurl.com/3wo5vlz
>
> ebay # 200606770416
>
>
> On Thu, May 12, 2011 at 4:50 PM, < dwoerpel at wi.net > wrote:
>
>
> Me too! B Also from VB and same time period. A caveat, however. B Make sure
> you get the correct floor! B The Bugeye floor has a flat area to which the
> floor mounted gas pedal is attached. B If you get a later model floor the
> pedal cannot be mounted unless you get creative. B If you have suspended
> pedal set-up it won't matter which floor you get.
>
> Dave W.
>
>
>
>
>
>
> > I purchased floors from Vicky Brit back in the late '90's and specified
> > "No Oriental parts" and was supplied some very good ones that fit very
> > well--good heavy guage. They had, as I recall, the British Leyland label
> > on them. Not sure whether these are still available--that was a long time
> > ago.
> >
> > --David C.
> > THE SENILITY PRAYER : Grant me the senility to forget the people
> > I never liked anyway,
> > The good fortune to run into the ones I do, and
> > The eyesight to tell the difference.
> >
> >
> >
> >
> > ----- Original Message -----
> > From: "Jay" < jfishbein at snet.net >
> > To: "Spridgets" < spridgets at autox.team.net >
> > Sent: Thursday, May 12, 2011 11:35:04 AM
> > Subject: [Spridgets] Replacement Floors - Recommendations
> >
> > Someone asked me for recommended suppliers for replacements floors.
> >
> > Are all the floors on the retail market coming from the same supplier?
> >
> > What is everyone's experience with what is out there as far as fit and
> > accuracy
> > of the stampings?
> >
> > Thanks,
> >
> > jay
> Suggested annual donation B $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/spridgets/grunthaner@gmail.com
> _______________________________________________
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/spridgets/billmasq@hotmail.com