[Spridgets] brake bleeding

[Allen Hefner]

I agree.  Filling the MC before installing it saves you a lot of pumping.
Just remember to be gentle with your brake fluid.  Bubbles are not helpful.

 Allen Hefner
Norristown, PA

*Current:*
2006 Chebbie
*Former:*
1963 Sunbeam Alpine Series III
1967 Triumph TR4A IRS
1964 VW Type I
1967 VW Type II
1967 Rover 2000TC
1977 MG Midget



On Mon, May 9, 2011 at 10:16 PM, Steven Guterman <an5.sprite at gmail.com>wrote:

> Bleeding the brakes can be a PITA.  If you bench bleed the master then you
> have less air to remove form the lines.  Unless of course if you have a
> power bleeder than it makes little difference.
>
>
>
> On Mon, May 9, 2011 at 9:57 PM, Jess Power <jessmd1 at comcast.net> wrote:
>
> > Is it necessary to bench bleed a new master cylinder that only has a
> single
> > line coming out to work on all 4 brakes?
> > _______________________________________________
> >
> > Donate: http://www.team.net/donate.html
> > Suggested annual donation  $12.75
> > Archive: http://www.team.net/archive
> > Forums: http://www.team.net/forums
> > Unsubscribe/Manage:
> > http://autox.team.net/mailman/options/spridgets/an5.sprite@gmail.com
> _______________________________________________
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/spridgets/lbc77mg@gmail.com