[Spridgets] distrubutoe removal and points replacement

[Peter Caldwell]

Scratch a mark on the dist body, and the adjacent clamp. Loosen clamp 
with 7/16 wrench, may want to spread with screwdriver. undo cap 
clamps, pull dist. Replace points, set gap, replace dist. lining up 
the 2 scratches. Be sure dist is seated all the way. That last 1/8th 
inch is important. Tighten clamp a little bit. Replace cap, start 
car, adjust timing just a hair. shut off, tighten clamp the rest.
      10 minutes, tops.
Peter
==
At 03:45 PM 5/4/2011, you wrote:
>Okay.anyone want to offer up a fast way to remove the dist and swap in a new
>set of points.  A way easy to do on the road so to speak.
>
>
>
>Leo