[Spridgets] DM2 distributors

[Peter Caldwell]

When you take a dizzy apart, you should mark the relative position of 
the upper shaft to the lower shaft. Yours, apparently got spun 
around. I always mark the rotor notch and the offset so I get them 
right. In this case they can go together two ways, but only one is right ;-b

Peter



At 10:36 AM 6/27/2011, Mark Haynes wrote:
>I tried that, the hole is offset by just enough that it won't work-unless
>you're TIGHT, like I am- I had a shorter pin of the same diameter that I'm
>using at the moment-it engages one side of the drive dog and the whole of the
>shaft. Now I just need to free up the counterweights (no centrifugal advance)
>and it'll all be good.
>Peter- Thanks for letting me know about Jeff's fix, I'll bring the bad dizzy
>with. I was hoping that he'd be at the 50th.
>
>Mark Haynes
>It only goes one way-Pay it Forward
>HAN6L12977
>HAN5L8016
>
>---------- Original Message ----------
>From: derf <derf247 at gmail.com>
>To: Mark Haynes <haynes386 at netzero.net>
>Cc: spridgets at autox.team.net
>Subject: Re: [Spridgets] DM2 distributors
>Date: Mon, 27 Jun 2011 10:16:16 -0500
>
>The drive dog can be removed and re-installed 180 out, right?
>
>
>____________________________________________________________
>57 Year Old Mom Looks 27!
>Mom Reveals $5 Wrinkle Trick That Has Angered Doctors!
>http://thirdpartyoffers.netzero.net/TGL3231/4e08a3a37f7c944est01duc
>_______________________________________________
>
>Donate: http://www.team.net/donate.html
>Suggested annual donation  $12.75
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe/Manage: 
>http://autox.team.net/mailman/options/spridgets/peter@nosimport.com
>
>
>
>
>-----
>No virus found in this message.
>Checked by AVG - www.avg.com
>Version: 10.0.1388 / Virus Database: 1513/3729 - Release Date: 06/27/11