[Spridgets] Getting ready to pull engine and change cam

[Steven Guterman]

Thanks all for the input,   I called the folks at APT, seem very
knowledgeable. I will likely go with a cam they build.

Steve

On Tue, Jul 12, 2011 at 3:30 PM, <WeslakeMonza1330 at aol.com> wrote:

> **
>  I wouldn't bother with the Kent 266 as it's too mild.  The Kent 276 and
> Piper 270 are similar but the Kent might be ground to a higher standard.
> Since you're in the USA why not buy 'merican and give David Anton at
> www.aptfast.com a call as he grinds his own cams.
>
> Regards
>
> Weslake-Monza 1330
>
> In a message dated 12/07/2011 17:15:56 GMT Daylight Time,
> an5.sprite at gmail.com writes:
>
> Kent 266 or mp266
> Kent 276
> Piper 270
> Swift SW5-07