[Spridgets] 3-D PRINTER - No LBC

Brad Fornal tequila.brad at gmail.com
Wed Jul 6 06:52:45 MDT 2011


Sorry, that just doesn't seem right. I don't see how it can get the interior
dimensions, from just holding a "scan gun" over the top of it.
Watch the video closely, and look at the adjustment gear on the original, vs
the "plastic" tool. They are different. If it reproduces EXACTLY, why, is it
different?

On Wed, Jul 6, 2011 at 7:30 AM, Kitterer Bob <bkitterer at me.com> wrote:

> Leo,
>
> That is a major importance!  If you are designing a very complex system and
> want to be sure that not only all the parts fit and work but that it can
> also be assembled.  You can better evaluate how the machining will be done.
>  All of this at a fraction of the cost standard prototyping.
>
> Sent from my iPhone
>
> On Jul 6, 2011, at 12:20 AM, Leo <60bugeye at cebridge.net> wrote:
>
> > Explain to me how the printer does anything that is of Major importance
> > except for development comncept parts.  Is it that you can take the part
> and
> > then create a mold from it?
> >
> > Leo
> >
> > -----Original Message-----
> > From: spridgets-bounces at autox.team.net
> > [mailto:spridgets-bounces at autox.team.net] On Behalf Of Larry & Sandi
> Miller
> > Sent: Tuesday, July 05, 2011 10:32 PM
> > To: Kitterer Bob
> > Cc: Spridgets
> > Subject: Re: [Spridgets] 3-D PRINTER - No LBC
> >
> > I have a friend that has one of the printers and is starting to get a lot
> of
> > business. He does taillights and trim pieces.
> >
> > Larry Miller
> >
> > On Jul 5, 2011, at 7:45 PM, Kitterer Bob wrote:
> >
> >> Am sure it is expensive but I think you buy their service rather than
> > buying
> > the printer.
> >>
> >> Sent from my iPhone
> >>
> >> On Jul 5, 2011, at 10:35 PM, Frankie Clarici 4th <clarici at verizon.net>
> > wrote:
> >>
> >>> Jay Leno featured that on his site. Its pretty amazing what he does
> with
> > it.
> >>>
> >>>
> >>> Must be a pricey machine.
> >>>
> >>> Frankie
> >>>
> >>> -----Original Message-----
> >>> From: spridgets-bounces at autox.team.net
> >>> [mailto:spridgets-bounces at autox.team.net] On Behalf Of Kitterer Bob
> >>> Sent: Tuesday, July 05, 2011 9:53 PM
> >>> To: Spridgets
> >>> Subject: [Spridgets] 3-D PRINTER - No LBC
> >>>
> >>> This is amazing.
> >>>> You have to watch this.  It s really, really cool.
> >>>>
> >>>> 3-D PRINTER
> >>>>
> >>>> http://www.youtube.com/watch?v=ZboxMsSz5Aw
> >>>>
> >>> Bob Kitterer
> >>>
> >>> 1960 Austin Healey Sprite (Mk IV in disguise) - in storage
> >>> 1966 Austin Healey Sprite Mk III (Trevor) - still in boxes - in storage
> >>> _______________________________________________
> >>>
> >>> Donate: http://www.team.net/donate.html
> >>> Suggested annual donation  $12.75
> >>> Archive: http://www.team.net/archive
> >>> Forums: http://www.team.net/forums
> >>> Unsubscribe/Manage:
> >>> http://autox.team.net/mailman/options/spridgets/clarici@verizon.net
> >> _______________________________________________
> >>
> >> Donate: http://www.team.net/donate.html
> >> Suggested annual donation  $12.75
> >> Archive: http://www.team.net/archive
> >> Forums: http://www.team.net/forums
> >> Unsubscribe/Manage:
> > http://autox.team.net/mailman/options/spridgets/millerls@ado13.com
> > _______________________________________________
> >
> > Donate: http://www.team.net/donate.html
> > Suggested annual donation  $12.75
> > Archive: http://www.team.net/archive
> > Forums: http://www.team.net/forums
> > Unsubscribe/Manage:
> > http://autox.team.net/mailman/options/spridgets/60bugeye@cebridge.net
> _______________________________________________
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/spridgets/tequila.brad@gmail.com
>
>


-- 
DON JULIO 1942

www.myspace.com/tequilabrad


More information about the Spridgets mailing list