[Spridgets] Datsun tranny fill plug questions

[Shop at " Just Brits "]

<< Normal thread..
Have you tried
1) PBlaster or Kroil? >>

OR [and BETTER yet] "Busty", Dave ???

<< or
2) Heating the area with a 100W lamp?
or
3)  Freezing the plug with dry ice? >>

Another thing to try AFTER "foaming on" whatever penetrating fluid
is put the 9/16" Open End Wrench BACK on the plug and with a
RUBBER BFH, knock it TIGHTER.  
Then RE-APPLY "foamed on penetrate" and let sit for a couple brews 
or so;  9"16" Open End Wrench BACK on the plug and with a RUBBER 
BFH, knock it UN-tight & re-foam.  Repeat alternating steps until the
"damned thing starts to turn" !!

You WILL 'win' !

Ed
Please visit Frank's site at:			www.justbrits.com
[ it IS Frank's, NOT mine]